Glenn Curtiss : biography
On May 29, 1910, Curtiss flew from Albany to New York City to make the first long-distance flight between two major cities in the U.S. For this flight, he won a $10,000 prize offered by publisher Joseph Pulitzer and was awarded permanent possession of the Scientific American trophy.
In June 1910, Curtiss provided a simulated bombing demonstration to naval officers at Hammondsport. Two months later, Lt. Jacob E. Fickel demonstrated the feasibility of shooting at targets on the ground from an aircraft with Curtiss serving as pilot. One month later, in September, he trained Blanche Stuart Scott, who was possibly the first American woman pilot. The fictional character Tom Swift, who first appeared in 1910 in Tom Swift and His Motor Cycle and Tom Swift and His Airship, has been said to have been based on Glenn Curtiss.Dizer 1982, p. 35. The Tom Swift books are set in a small town on a lake in upstate New York.Karenko, J. P. tomswift.info, August 1, 2006. Retrieved: September 8, 2009.
Naval aviation
On November 14, 1910, Curtiss demonstration pilot Eugene Ely took off from a temporary platform mounted on the forward deck of the cruiser USS Birmingham. His successful takeoff and ensuing flight to shore marked the beginning of a relationship between Curtiss and the Navy that remained significant for decades. At the end of 1910, Curtiss established a winter encampment at San Diego to teach flying to Army and Naval personnel. It was here that he trained Lt. Theodore Ellyson, who was to become U.S. Naval Aviator #1, and three Army officers, 1st Lt. Paul W. Beck, 2nd Lt. George E. M. Kelly, and 2nd Lt. John C. Walker, Jr., in the first military aviation school. The original site of this winter encampment is now part of Naval Air Station North Island and is referred to by the Navy as "The Birthplace of Naval Aviation".
Through the course of that winter, Curtiss was able to develop a float (pontoon) design that would enable him to take off and land on water. On January 26, 1911, he flew the first seaplane from the water in the United States.Roseberry 1972, p. 314. Demonstrations of this advanced design were of great interest to the Navy, but more significant as far as the Navy was concerned, was Eugene Ely successfully landing his Curtiss pusher (the same aircraft used to take off from the Birmingham) on a makeshift platform mounted on the rear deck of the battleship USS Pennsylvania. This was the first arrester-cable landing on a ship and the precursor of modern day carrier operations. On January 28, 1911, Ellyson took off in a Curtiss “grass cutter” to become the first Naval aviator.
Curtiss custom-built floats and adapted them onto a Model D so it could take off and land on water to prove the concept. On February 24, 1911, Curtiss made his first amphibian demonstration at North Island by taking off and alighting on both land and water. Back in Hammondsport, six months later in July 1911, Curtiss sold the U.S. Navy their first aircraft, the A-1 Triad. The A-1, which was primarily a seaplane, was equipped with retractable wheels, also making it the first amphibian. Curtiss trained the Navy’s first pilots and built their first aircraft. For this, he is considered in the USA to be "The Father of Naval Aviation". The A-1 was immediately recognized as so obviously useful, it was purchased by the U.S. Navy, Russia, Japan, Germany and Britain. Curtiss won the Collier Trophy for designing this aircraft. US Centennial of Flight Commemoration, 2003. Retrieved: January 28, 2011.
Around this time, Curtiss met the retired English naval officer John Cyril Porte who was looking for a partner to produce an aircraft with him in order to win the Daily Mail prize for the first transatlantic crossing. In 1912, Curtiss produced the two-seat "Flying Fish", a larger craft that became classified as a flying boat because the hull sat in the water; it featured an innovative notch (known as a "step") in the hull that Porte had recommended for breaking clear of the water at takeoff. Curtiss correctly surmised that this configuration was more suited to building a larger long-distance craft that could operate from water, and was also more stable when operating from a choppy surface. In collaboration with Porte, Curtiss designed the "America" in 1914, a larger flying boat with two engines, for the transatlantic crossing.



